|
|
 |
|
1997-2006 General
Motors W-Body
|
|
(97-03
Grand Prix, 97-Current Regal, 00-Current Monte Carlo/Impala)
|
|
|
|
The W-Body rear suspension is marginal
at best when it comes to aggressive driving. The factory
uses small diameter tubing on the lateral links and formed
sheet metal for the trailing arms. When subjected to higher
loads than Grandmas typical driving, they tend to flex,
producing unpredictable handling characteristics. BMR
tubular lateral arms and trailing arms increase the suspensions
reaction times and promote improved consistency throughout
the driving experience.
|
Rear Suspension Arms
|
Lateral Arms - rear
mount
|
Lateral Arms - forward
mount
|
Trailing Arms
|
|
|
|
|
| BMR adjustable lateral arms replace the
factory 3/4" diameter arm with a heavy duty, 1.25"
diameter tubular unit. The large 3/4" adjuster allows
"on-car" adjustment in an accessible location. The
OE rear mount lateral bars are not adjustable from the factory
but the BMR replacements provide additional caster adjustment
that was not possible with a fixed length arm. The BMR tubular
trailing arms replace the factory stamped, u-shaped trailing
arm with a 1.5" diameter tubular upgrade. All arms come
standard with low deflection, fluted polyurethane bushings
equipped with grease fittings. Available in Black
Hammertone or red powdercoat. |
| Part #TCA011 |
Tubular trailing arms |
$129.95
pr
|
| Part #TCA012 |
Adjustable Lateral Arms - forward
mount |
$209.95
pr
|
| Part #TCA013 |
Adjustable Lateral Arms - rearward
mount |
$209.95
pr
|
| Kit #CAP004 |
All of the above - Save $40 |
$509
set
|
| BMR strut tower braces will increase the
handling capabilities of your Grand Prix by eliminating strut
tower deflection and increasing chassis rigidity. BMR provides
the strongest braces by far in the market as shown in the
images below. Built with 1/4" wall thickness 1-1/8"
CNC machined aluminum tube and laser cut 3/16" steel
mounting plates, you can be sure that quality and strength
has not been compromised. Available in Black
Hammertone or red powdercoat.'97-05 models only.
NOTE: rear strut tower brace will not fit 04-05 Grand Prix.
All STB will fit 00-05 Monte Carlo/Impalas (all models) |
| STB005 |
Front Strut tower brace - 1997-2004
W-Body |
$145.95
|
| STB006 |
Rear Strut tower brace - 1997-2003
W-Body |
$145.95
|
| STP001 |
Front and Rear braces - 1997-2003
W-Body - Save Over $10 |
$279
|
PACKAGE PRICING
| Complete kit including front
and rear Strut Tower Braces and all 3 pairs of rear suspension
arms - Save Over $60 |
|
|
|
