|
|
 |
2nd Generation F-Body (1970-1981)
| AA015 |
Upper pair |
$346.95 |
| AA014 |
Lower pair |
$549.95 |
| AAP003 |
Upper and Lower Kit - Save Over
$65 |
$829 |
|
|
BMR A-arms are
fabricated from heavy duty MIG welded DOM tubing and come
pre-assembled with low deflection polyurethane bushings, bump
stops and new ball joints. Lower arms have sway bar mounting
provisions and work with all stock replacement springs and
shocks or with the popular QA1 Pro Coil kit. Upper A-arms
provide additional header clearance and are assembled with
a new billet cross shaft and HD stainless bushing retainers.
Expect a combined weight savings of 10 lbs. Available in Black
Hammertone or red powdercoat. |
|
|
|
If you are looking for increased
cornering capabilities with decreased body roll, BMR sway
bars are the answer. Front bars are made from 1.25"
cold formed steel to better resist torsional fatigue and
retain their "memory" far longer than conventional bars.
Rear solid bar is a beefy 1" diameter and comes complete
with all new mounting hardware and polyurethane bushings.
Available in Black
Hammertone or red powdercoat.
|
| Part
# SB008 |
Front |
$189.95 |
| Part
# SB007 |
Rear |
Availability
Pending
|
|
|
Laser cut from NHRA legal
1/8" aluminum for a lightweight, precise factory fit
using all existing mounting holes. Ships bare, powdercoating
available at additional cost.
|
| FP002 |
AC Delete Panel - 1970-1981 F-Body |
$79.95 |
|
QA1 SHOCKS
Stocker Star
-
Easy
Bolt-in Installation
-
On-car
Valving Adjustment
-
Machined,
Forged Aluminum Body
-
Heavy Duty 5/8"
Piston Rod
-
100% Dyno Tested and
Serialized
-
Shock Mounting Hardware
Included
- Single or Double Adjustable Available
- Available in Street or Drag Race valving
|
|
| TC1958P |
Front - Single Adjustable |
$139.95
each |
| DTC1958P |
Front - Double Adjustable |
$289.95
each |
| RC1958P |
Front - Drag Race |
$139.95
each |
|
|
|
| TC2109P |
Rear - Single adjustable |
$139.95
each |
|
ADJUSTABLE BOLT-IN SHOCKS
|
|
| S5267 |
Front 70-81 Single adjustable |
$149.95 |
| S5268 |
Rear 70-81 Single adjustable |
$149.95 |
| S5068 |
Rear 70-81 Double adjustable |
$249.95 |
PROTHANE BUSHINGS
|
7-139
|
Body mount bushing kit. 1967-1981 |
$67.95 |
|
|
Moser Cast Aluminum
Rear end Covers
|
| 7107 |
8.2" and 8.5"
10 Bolt |
$169.95 |
| 7110 |
12 Bolt |
$159.95 |
|
| Made from heavy duty T56 cast aluminum,
these covers are designed to improve ring and pinion gear
life by strengthening the case and reducing ring gear deflection.
Comes complete with all necesarry bolts, washers, and gaskets. |
|
|
Moser Bolt-in Rearends
Call or e-mail for pricing
|
| Bulletproof your drivetrain with a bolt-in
Moser rear end. Whether you want a new Ford 9" style
housing or a new 12 Bolt for your F-Body, Moser makes the
right rearend for your application. In todays time, it's impossible
to build a lower cost, direct fit 9" rearend and OE 12
bolts are becoming increasingly scarce. Moser can put it all
together for you at a reasonable cost and provide a product
able to withstand years of abuse. If you don't see something
in the product options below, give us a call or email to get
more information. |
| Ford 9" |
Complete bolt-in rearend w/nodular
steel center section, Auburn or Detroit Locker Posi unit,
and your choice of 28, 31, 33, or 35 spline axles. Gear ratios
available - 3.50, 3.70, 3.89, 4.11, 4.30, 4.56 |
|
| |
---Add
a housing back brace |
|
| |
---Upgrade
to an aluminum center section |
|
| |
---Add
drain/fill plugs in housing |
|
| |
---Add
extended wheelstuds |
|
| |
|
|
| 12 Bolt |
Complete 12 bolt rear with Eaton
posi and 30 spline axles. Gear ratios available - 3.42, 3.73,
4.11, 4.30, 4.56 |
|
| |
---Upgrade
to 33 spline axles w/33 spline Eaton posi |
|
| |
---Add
cast aluminum rearend cover |
|
| |
---Add
extended wheel studs |
|
|
|
REAREND COMPONENTS
|
|
From upgraded components
for your OE rearend to complete bolt-in rears, Strange has
you covered! Listed below are complete bolt-in rear ends
however Strange also manufactures bulletproof components
for your OE 10 and 12 bolt rears as well. We can get new
posi units, gears, axles, etc. Give us a call to see what
parts are right for your application.
|
| |
|
|
| PRSL05 |
DANA 60 complete bolt-in
rearend with S/T 35 spline axles, 1/2" studs, Trac-Lok
posi-unit, standard gear set, U1600 steel pinion yoke(1350),
chrome cover, breather vent, filler and drain plug. Gear ratios
available - 3.54, 3.73, 4.10, 4.30, 4.56, 4.88, 5.13, 5.87 |
$1795.95 |
| OPRS08 |
-upgrade to cast aluminum rear
cover |
+$45.95
|
| OPRS01 |
-Upgrade to Detroit Locker |
+$369.95
|
| OPRS12 |
-Upgrade to 5/8"
studs |
+$45.95
|
| OPRS18 |
-Upgrade to billet yoke |
+$51.95
|
| PRSL10 |
DANA 60 complete bolt-in rearend
with PRO RACE 35 spline axles, 1/2" studs, PRO lightweight
spool, standard gear set, U1600 steel pinion yoke(1350),
chrome cover, breather vent, filler and drain plug. Gear
ratios available - 3.54, 3.73, 4.10, 4.30, 4.56, 4.88, 5.13,
5.87
|
$1729.95 |
| OPRS08 |
-upgrade to cast aluminum rear
cover |
+$45.95
|
| OPRS14 |
-Upgrade to 5/8" studs |
+$41.95
|
| OPRS18 |
-Upgrade to billet yoke |
+$51.95
|
| PRSL15 |
DANA 60 complete bolt-in rearend
with Pro Race 40 spline axles, 5/8" studs, Pro lightweight
spool, standard gear set, U1600 steel pinion yoke(1350),
chrome cover, breather vent, filler and drain plug. Gear
ratios available - 3.54, 3.73, 4.10, 4.30, 4.56, 4.88, 5.13,
5.87
|
$1995.95 |
| OPRS08 |
-upgrade to cast aluminum rear
cover |
+$45.95
|
| OPRS18 |
-Upgrade to billet yoke |
+$51.95
|
|
|
|
AEROSPACE COMPONENTS
BRAKE KITS
|
|
|
|
|
AC-206
|
AC-530
|
AC-830
|
|
KITS INCLUDE:
• Billet Aluminum 4 Piston Calipers
• Billet Aluminum Mounting Brackets
• Grade 8 Hardware
• Billet Aluminum Hubs
• Screw on Dust Caps
• Bearings and Seals(where applicable)
• Billet Aluminum Hub Adapters
• Brake Pads
|
| AC-206 |
1970-1978 F-Body Front Lightweight
Drag Kit - 10-3/4" rotors |
$635 |
| AC-206VR |
1970-1978 F-Body Front Street
Kit - 11-3/4" rotors |
$710 |
| AC-206VRDSP |
1970-1978 F-Body Front Street
Kit - 11-3/4" rotors cross-drilled, slotted and zinc
plated |
$815 |
| AC-207 |
1979-1981 F-Body Front Lightweight
Drag Kit |
$635 |
| AC-207VR |
1979-1981 F-Body Front Street
Kit - 11-3/4" rotors |
$710 |
| AC207VRDSP |
1979-1981 F-Body Front Street
Kit - 11-3/4" rotors cross-drilled, slotted and zinc
plated |
$815 |
| AC-530 |
10/12 Bolt Rear Drag Kit with
C-clip Eliminators |
$509 |
| AC-830 |
10/12 Bolt Rear Street Kit with
Internal Parking Brake |
$755 |
|
|
|
QUICK RATIO POWER
STEERING GEARBOXES
|
- Trivalent Chromium Free Plating offers
ten times the corrosion resistance of a painted box.
- Features Unique Tech billet cap included.
- Rack and Pinion Valve Spool for SMOOTH,
PRECISE steering and handling.
- Four Bolt Mounting Pattern also interchanges
to early three bolt application.
- Available in four ratios (12:1, 14:1,
16:1, 17:1) to fit virtually any application with the
steering feel you prefer.
NOTE: Ratios are approximate - input shaft 3/4-30 spline.
|
| FR1560 |
12:1 ratio |
$569.95 |
| FR1561 |
14:1 ratio |
$569.95 |
| FR1562 |
16:1 ratio (OE ratio) |
$569.95 |
| FR1563 |
17:1 ratio (OE ratio) |
$535.95 |
Manual Steering Gearboxes
|
Image may not represent actual product
|
| Tired of searching for a manual steering
box in the junkyards, Ebay, and classifieds? Flaming River
started with a clean slate when designing these lightweight
GM manual gearboxes with features that include larger gears,
needle bearings, and 30% stronger sector shafts. On top of
all that, the box only weighs 12 lbs., a weight reduction
of up to 30 lbs! NOTE: Not recommended for vehicles weighing
over 3000 lbs. |
| FR1496 |
1970-1981 Camaro |
$568.95 |
| FR1495-1 |
1972-1981 Firebird |
$568.95 |
|
|
FLAMING RIVER
BATTERY DISCONNECT
|
The lever kit allows for remote actuation
of the Big Switch. The kit includes an 18" long, diameter
aluminum threaded rod, T-handle, mounting bracket and necessary
hardware. A "push off" decal is included. Accepted
for IHRA/NHRA competition use. Click HERE
for Big Switch features.
|
| FR1003-2 |
Big Switch with Lever Kit |
$98.95 |
|
|
